Petrol prices are on the rise – in May, drivers in the UK saw the biggest fuel hike in 18 years, according to the RAC Fuel Watch. Filling up a petrol tank has rocketed by an average 6p-a -litre. The average litre of unleaded petrol is now at 129.2p – the highest level in 3 years. While diesel is at 132.4p.


This chart from the RAC Foundation shows the almost 40% spike in petrol prices since early 2016…


Anyone who is managing a household knows how challenging these fuel increases can be. Not only do they eat into the budget, it can make it more difficult to efficiently run the car from A to B.

Families looking for ways to save on fuel often should consider the following tips to see how they can make this possible..


How To Save Money At The Fuel Pump…

If you want to save money, it’s essential to follow some basic steps that will prove to be more cost-efficient for your vehicle in the long-term. Here are some of the best tips to consider…


1. Make your car fuel efficient

Some simple steps for making your car more fuel efficient include keeping your tyres inflated, taking the roof rack off and emptying your car of clutter. Turning off your air con when driving at low speeds is also recommended.

An empty rack has been reported to increase the fuel cost over time. Anywhere from 1%-15% – while a fully loaded roof rack will add 20% to 50% to your fuel bill. Fuel consumption is made up of several components: losses in the engine, rolling resistance and wind resistance. The roof rack increases the wind resistance and this grows enormously with speed, much more than rolling resistance.

Keeping your tyres inflated is essential. When the tyres are in good shape, this can seriously increase fuel efficiency. Under-inflated tyres can be dangerous and increase fuel waste.

A car with clutter in the boot can waste fuel. Many drivers use their car as extra storage space – yet carrying extra weight in this area can affect fuel efficiency. Keeping your car clean could help you to save on fuel.


2. Drive more efficiently

Driving more efficiently means driving safely and sensibly. Keeping the windows closed while driving at high speeds is recommended. Slowing down means dropping your speed from 80mph to 75mph – this can save you up to 25% in fuel.

Sensible driving means learning to read the road. Anticipating the actions of other drivers and other hazards is essential. Driving smoothly in heavy traffic and avoid driving fast to catch up with the car in front, then breaking suddenly.


3. Find the cheapest fuel prices

Doing your research before you go driving is essential practice to avoid paying higher fuel prices than necessary. While using a website such as can help you to quickly and easily find the cheapest petrol prices in your area. Taking the time to do this research can save you more money at the petrol pump in the long-term.


4. Accelerate gradually without revving

By gradually accelerating the car rather than revving the engine, this improves fuel efficiency. Drive at a consistent speed and in a high gear. Avoid hard acceleration as harsh driving can cost your fleet an extra three miles per gallon. It’s also bad for the environment and harsh driving has been proven to emit more harmful gases into the atmosphere.


5. Change up a gear sooner

This may take some practice, but changing up a gear sooner than feels natural has some benefits. Change the gear without labouring the engine. If you have a fuel efficiency display, you will be able to see the immediate impact this has.


6. Use your brake carefully

While driving, use your brake sparingly. By pressing down on the brake, you are converting energy (fuel) put into the car as heat. I comparison, if you naturally learn to drive slow, you burn the stored energy more efficiently. Good road positioning is essential for this.


7. Use Quantogram Pure Combustion Device (PCD)

One convenient solution that may save you on fuel costs is to use Quantum energy as found in the Quantogram Pure Combustion Device. This device cuts harmful emissions from cars, buses and trucks. It also cuts the amount of fuel you use from 10% up to 40% depending upon the age of the engine and the fuel.

PCD is a simple-to-install device is placed on or near the fuel tank, creating a frequency field to pre-treat the fuel. During the pre-treatment of fuel, trace toxin molecules are neutralized. When the pre-treated fuel reaches the engine cylinders combined with air, the combustion process is more complete…resulting in reduced emissions. The toxins, having been rendered inert by this fuel treatment, reduce emissions as well as improving fuel efficiency.

Emissions produced by treated fuels are reduced to practically zero and included: Sulphur Oxides (SOx), Nitrogen Oxides (NOx), Carbon Monoxide (CO) and Carbon Dioxide (CO2).


Recommended Examples

Quantogram Pure Combustion Device (PCD)Uses QuantoGram Technology for petrol-diesel vehicles to lower fuel emissions and give higher performance. Simple to install – place near or on the fuel tank. The device creates a frequency field to pre-treat the fuel. When the pre-treated fuel reaches the engine cylinders combined with air, the combustion process is more complete and may result in reduced emissions. Available from Good Health Naturally.